Ich will ja auf dem neuen Laptop nicht nur spielen, sondern auch mal wirklich was tun. Aus diesem Grund brenne ich mir eine frische Install‐CD Gentoo‐Linux. Diese CD ist im Prinzip eine minimale LiveCD mit welcher wir zumindest online können — man kann genausogut Knoppix nehmen, jedoch hatte ich keine aktuelle Version herumliegen.

Sehen wir uns doch einmal die Hardware genauer an, bevor wir loslegen:

Die CPU ist ein Dual‐Core CPU, welcher sich als zwei Prozessoren darbietet:

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel® CPU T2500 @ 2.00GHz
stepping : 8
cpu MHz : 1995.013
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pni monitor vmx est tm2 xtpr
bogomips : 3998.02

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel® CPU T2500 @ 2.00GHz
stepping : 8
cpu MHz : 1995.013
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pni monitor vmx est tm2 xtpr
bogomips : 3990.29

Der PCI Bus bietet folgende Gerätschaften:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7‑M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01d8 (rev a1)
06:00.0 Network controller: Intel Corporation Unknown device 4222 (rev 02)
08:06.0 CardBus bridge: Texas Instruments Unknown device 8039
08:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a
08:06.2 Mass storage controller: Texas Instruments Unknown device 803b
08:06.3 Class 0805: Texas Instruments Unknown device 803c
08:08.0 Ethernet controller: Intel Corporation Unknown device 1092 (rev 01)

Die Platten lassen sich wie folgt partitionieren:

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 3825 30724281 7 HPFS/NTFS
/dev/sda2 3826 4677 6843690 c W95 FAT32 (LBA)
/dev/sda3 4678 12161 60115230 5 Extended
/dev/sda5 4678 4690 104391 83 Linux
/dev/sda6 4691 4934 1959898+ 82 Linux swap / Solaris
/dev/sda7 4935 5178 1959898+ 83 Linux
/dev/sda8 5179 5787 4891761 83 Linux
/dev/sda9 5788 12161 51199123+ 83 Linux

Als Dateisysteme empfehlen sich XFS als Root‐Partition, ReiserFS 3.6 für den Portage und ext2 für unsere /boot‐Partition. Die noch frei bleibende Partition wird später für /home verwendet um bei Bedarf verschlüsseln zu können bzw um keine Daten zu verlieren wenn man einmal neu aufsetzen muss.

Der Bootstrap und emerge ‑e system laufen wie gewohnt ohne Probleme ab und ich fahre nach Handbuch fort.

Vorheriger Beitrag Nächster Beitrag